To Next Page

To Previous Page

Data Results

Sample ID: XXXX

Program: XX:XX at XXXX C

Crucible Wt: XXXX

Start Wt: XXXX

Final Wt: XXXX

% Ash: XXXX%

67. Press the PRINT key to print the data results or the “computer” key to send

the data to a PC.

Note: The instrument will continue to maintain the programmed temperature.

68. To process additional samples using the same parameters, press the START key.

69. To end the standard Quick Test method and return to the CEM Method Menu,

press the STOP key.

66. Wait for the instrument to determine the ﬁ nal weight and calculate the data

results.

READING BALANCE

65. Press the NEXT key.

Questions and Answers:

Need help?

Do you have a question about the CEM Phoenix and is the answer not in the manual?

CEM Phoenix Specifications

General