1 Operational Manual
2.33.5 Counting Method of Good and Bad Products :
Move cursor to bad product classified row, press
or
to select
“
Ｆ
”
“
Ｇ
”
“
Ｈ
”
“
Ｉ
”
“
Ｊ
”
. Press
or to select
“
open
”
, therefore, controller
can classify the product mold by standard and deviation, and the bad product counter
will plus 1 in menu 43.
2.33.6 Quality Record Printing:
A) Move cursor to
“
LL
”
to set printing space, 1 represents printing every mold, 2
represents printing once two times, and 0 represents not printing.
B) Move cursor to printer selection switch
“
Ｍ
”
, press or to select
“
open
”
, then printer is in normal operation.
C) After one mold, the printer is in the setting condition.
04/08/13
97
To Next Page
Loading...
