Chroma 2238 - Default Audio List

Operation
2-25
Default Audio List
NO.
Description
49
Audio Input Mode = EXTERNAL, External Audio Input = OPTICAL
50
Audio Input Mode = EXTERNAL, External Audio Input = COAXIAL
51
Sample Rate=48kHz, Volume=1.5V, Freq=100Hz, Tone
52
Sample Rate=48kHz, Volume=1.5V, Freq=200Hz, Tone
53
Sample Rate=48kHz, Volume=1.5V, Freq=500Hz, Tone
54
Sample Rate=48kHz, Volume=1.5V, Freq=1 kHz, Tone
55
Sample Rate=48kHz, Volume=1.5V, Freq=2 kHz, Tone
56
Sample Rate=48kHz, Volume=1.5V, Freq=5 kHz, Tone
57
Sample Rate=48kHz, Volume=1.5V, Freq=10kHz, Tone
58
Sample Rate=48kHz, Volume=1.5V, Freq=20kHz, Tone
59
Sample Rate=48kHz, Volume=1.5V, Freq=10~20kHz, Sweep
(Frequency changes from 10Hz to 20kHz in 2 sec.)
60
Sample Rate=48kHz, Volume=1.5V, Freq=20k~10Hz, Sweep
(Frequency changes from 20kHz to 10Hz in 2 sec.)
61
Sample Rate=48kHz, Volume=1.5V, Freq=10~20k~10Hz, Sweep
(Frequency changes from 10Hz to 20kHz and back to 10Hz in 2 sec.)
 AUDIO NAME: It is the name of selected AUDIO NO.
 AUDIO INPUT MODE
INTERNAL: It is the audio source from internal.
EXTERNAL: It is the audio source from external.
When INTERNAL is set for AUDIO INPUT MODE, three settings – AUDIO
SETTING, FL CH and FR CH will appear for selection.
 AUDIO SETTING: It lists the general settings as shown below when enabled.