Operation
PORT NO. : Select the port (HDMI: Port 1~Port 4, DP: Port 1~Port 2, ANALOG: Port 1) to
be executed.
SET TYPE: Select the parameter type (Brightness, Contrast, Hue and Saturation) to be
set.
SET VALUE: Set the parameter value.
When the settings are done, select SET for DDCCI Action and touch to send out the
parameter commands.
2.5.2.9 HDR
This item edits and controls the HDR function. Touch HDR on the LCD panel under Function
to edit the HDR parameters. The HDR function is limited to using HDR TEST PATTERN
(#1020~#1200).
To Next Page
Loading...