Operation
YES Audio channel has no voice output.
Once the settings are done, edit the AUDIO NO. and AUDIO NAME to
be saved and touch to save it.
AUDIO NO: It sets the audio number to be saved (only 1~50 for user
defined).
AUDIO NAME: It edits the audio file name.
When EXTERNAL is set for AUDIO INPUT MODE, the EXTERNAL AUDIO INPUT will set to
COAXIAL. So, please use external coaxial for input audio source. In addition, a selection of
EXT. AUDIO SAMPLE RATE is provided for setting the sample rate of external audio source.
The EXT. AUDIO SAMPLE RATE has 32.0, 44.1, 48.0, 88.2, 96.0,
176.4 and 192.0 KHz for selection.
Once the settings are done, edit the AUDIO NO. and AUDIO NAME to
be saved and touch to save it.
AUDIO NO: It sets the audio number to be saved (only 1~50 for user
defined).
AUDIO NAME: It edits the audio file name.
When the AUDIO INPUT MODE is set to INTERNAL, press OUTPUT
key to output the internal audio source.
When the AUDIO INPUT MODE changes to EXTERNAL, it can output
without pressing the OUTPUT key.
2.5.2.4 EDID
This item edits and controls the EDID function. Touch EDID on the LCD panel under Function
to edit the EDID parameters.
To Next Page
Loading...