Chromate 4300 - Software Specifications

ChroMate™ ChroMate™ Operator’s Manual Doc. 4300 Rev. E 9
• Software:
PC interface with ChroMate™ Manager software – included (PC not
included)
Features: PC interface software (included) with
complete user prompting, error messages, full
plate reporting, automatic interpretation
options, duplicate options, controls locator,
curve plotting and editing
Format: CD-ROM and internet upgrades
Operating Systems: Windows
®
2000, NT 4.0, XP or Vista
Minimum System: Pentium II
®
/333 MHz, 128 MB RAM, CD
drive, SVGA monitor; USB port
Secondary menu options: Create/edit protocols, import/export data, LIS
Calculation modes: Single point calibration, point-to-point curve fit,
polynomial regression, linear and sigmoidal
regression (log and linear), cutoff absorbance,
multi-point % absorbance
Additional Features: User-programmable open system, selectable
plate formatting, reporting
QC options: Store control data, print Levey-Jennings or
QC range plots, calculate SDs
USB port: USB cable provided
• Physical
Enclosure: All metal enclosure
Dimensions: 7.5” x 8.0” x 16.5”
(19x20.3x42cm)
Weight: 12.471 lbs (5.657 kg)
• Environmental
Operating Temperature: 15 to 35
◦
C
Humidity: Between 10 and 85% non-condensing
Storage Temperature: 10 to 50
◦
C
Altitude: 2000m maximum
Design and instrument specifications are subject to change without notice.