Chromate 4300 - 6.2 COM Port Settings; 6.2.1 PC Communication (COM) Port Setting

78 ChroMate™ Operator’s Manual Doc. 4300 Rev. E
Error Code(s)/Problem: Solution:
402 Offset Voltage High,
ch(%d) Filt %d(%s)
>%1.3f volts
403 Lamp Voltage High,
ch(%d) Filt %d(%s)
>%1.3f volts
Contact Customer Service
Contact Customer Service
9001 Cal Page Size >64
bytes
Contact Customer Service
9002 Util Page Size >64
bytes
Contact Customer Service
9003 Error Page Size >64
bytes
Contact Customer Service
6.2 COM Port Settings
Generally the communication (COM) port setting of the PC and the 4300 ChroMate will not
require adjustment. However, the following steps are included just in case the user needs to
view the setting or make an adjustment to the setting.
6.2.1 PC Communication (COM) Port Setting
Follow the steps below to view or adjust the computer’s COM Port Setting.
Steps Prompts/Screen Display
Click on the START
button on the PC menu
bar:
Double-Click on the START button on the PC
Click on Control Panel