Chromate 4300 - 4.2.2 Factor Mode; 4.2.3 Standard Mode

ChroMate™ ChroMate™ Operator’s Manual Doc. 4300 Rev. E 23
4.2.2 Factor Mode
Factor:
Description:
In Factor Mode, the instrument reads
absorbances at the selected wavelengths,
and calculates concentrations by multiplying
the absorbance by the user supplied factor.
4.2.3 Standard Mode
Standard:
Description:
The instrument first accepts a calibrator
read singly or in multiple numbers and then
calculates concentrations based on a single-
point standard curve passing through the
point (0,0).
A blank is required to determine the (0,0)
point.