Chromate 4300 - 6. TROUBLESHOOTING; 6.1 Error Messages

76 ChroMate™ Operator’s Manual Doc. 4300 Rev. E
6. TROUBLESHOOTING
6.1 Error Messages
Explanation of Error Messages generated by the communications programming of the
ChroMate™ instrument:
Error Code(s)/Problem: Solution:
001 Invalid Command
002 Invalid Filter Number
Given
003 Invalid Row Number,
%d
004 Invalid Device Number,
%d
Check command for spelling and validity.
Filter number must be in valid range (0-3) or (0-5)
Row number must be in valid range (1-12)
Device number must be in valid range (0-3), contact
Customer Service
005 Invalid wiper value, %d
006 Invalid Cal Value, %d
007 Invalid Offset Value, %d
008 Invalid Gain Value, %d
Wiper number must be in valid range (0-3), contact
Customer Service
Value must be in valid range (20-110), contact
Customer Service
Offset value must be in valid range (5-250) contact
Customer Service
Gain value must be in valid range (5-250) contact
Customer Service
009 Invalid Number of
Steps, %d
010 Invalid Code
011 Invalid channel number
(1-8)
012 Invalid Serial ID
013 Invalid Lamp Timeout
%d
014 Invalid Lamp Warm
Time %d
Number of steps must be in valid range (0-1200)
Invalid code entered
Channel number must be in valid range (1-8)
Serial ID must be number (1-99999)
Lamp Timeout value bad (120-1800)
Lamp Warm time bad (0-60)