LUBRICANTS AND GREASES
Lubricating grease is rated for quality and usage
by the NLGI. All approved products have the NLGI
symbol on the label.
At the bottom NLGI symbol is the usage and qual-
ity identification letters. Wheel bearing lubricant is
identified by the letter ‘‘G’’. Chassis lubricant is iden-
tified by the letter ‘‘L’’. The letter following the us-
age letter indicates the quality of the lubricant. The
following symbols indicate the highest quality.
PARTS REQUIRING NO LUBRICATION
Many components on a Chrysler Corporation vehi-
cle require no periodic maintenance. Some compo-
nents are sealed and permanently lubricated. Rubber
bushings can deteriorate or limit damping ability if
lubricated. The following list of components require
no lubrication:
• Air Pump
• Generator Bushings
• Drive Belts
• Drive Belt Idler/Tensioner Pulley
• Wheel Bearings
• Rubber Bushings
• Starter Bearings/Bushings
• Suspension Strut Bearings
• Throttle Control Cable
• Throttle Linkage
• Water Pump Bearings
FLUID CAPACITIES
Fuel Tank..............................................68L (18 gal.)
Engine Oil
3.3L...........................................................4.7L (5 qts.)
3.5L........................................................5.2L (5.5 qts.)
Cooling System
3.3L................................................10.74L (10.17 qts.)
3.5L................................................12.46L (11.80 qts.)
Includes heater and coolant pressure bottle
Transmission ......................................9.4L (9.9 qts.)
Differential.................................................95L (1 qt)
NLGI SYMBOL
0 - 2 LUBRICATION AND MAINTENANCE
To Next Page
Loading...
