Panel Mode
Air comes from the outlets in the instrument
panel. Each of these outlets can be individu-
ally adjusted to direct the flow of air. The air
vanes of the center outlets and outboard
outlets can be moved up and down or side to side to
regulate airflow direction. There is a shut-off wheel
located below the air vanes to shut off or adjust the
amount of airflow from these outlets.
Bi-Level Mode
Air comes from the instrument panel outlets
and floor outlets. A slight amount of air is
directed through the defrost and side win-
dow demister outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer
air from the floor outlets.
Floor Mode
Air comes from the floor outlets. A slight
amount of air is directed through the defrost
and side window demister outlets.
Mix Mode
Air is directed through the floor, defrost, and
side window demister outlets. This setting
works best in cold or snowy conditions that
require extra heat to the windshield. This
setting is good for maintaining comfort while reducing
moisture on the windshield.
Climate Control OFF Button
Press and release this button to turn the
Climate Control ON/OFF.
Controlling The Rear Climate Controls
From The Front MTC Display/
Touchscreen
The Three-Zone Manual Temperature Control (MTC)
system allows for adjustment of the rear climate con-
trols from the front MTC display/touchscreen.
To change the rear system settings:
•
Press the Rear Climate button on the touchscreen to
display the rear climate controls. The control func-
tions now operate the rear system.
•
Press the Front Climate button on the touchscreen
to return to the front climate controls.
REAR CLIMATE CONTROL BUTTON
Press and release this button to access the
rear climate controls. The indicator will illu-
minate when the rear climate controls are
on.
REAR LOCK BUTTON
Press and release this button to lock out the
rear manual temperature controls from
adjusting the rear temperature and blower
settings.
FRONT CLIMATE BUTTON
Press and release this button to change the
display on the Uconnect system back to the
Front Climate Controls.
REAR TEMPERATURE CONTROL
These buttons provide the rear passengers with inde-
pendent temperature control.
Push the up arrow button on the touch-
screen to increase the temperature.
Push the down arrow button on the touch-
screen to decrease the temperature.
NOTE:
When the SYNC feature is active, the passenger’s tem-
perature moves up and down with the driver’s
temperature.
SYNC BUTTON
Press the SYNC To Driver button on the
touchscreen to toggle the SYNC feature
on/off. The SYNC indicator is illuminated
when this feature is enabled. SYNC is used
to synchronize the front and rear passenger tempera-
ture settings with the driver temperature setting.
Changing the front or rear passenger temperature set-
ting while in SYNC exits this feature.
NOTE:
The SYNC setting is only available on the touchscreen.
BLOWER CONTROL
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are seven blower
speeds available. Adjusting the blower
causes automatic mode to switch to manual operation.
The speeds can be selected using the buttons on the
touchscreen.
74 GETTING TO KNOW YOUR VEHICLE
To Next Page
Loading...
