8�- SOFTWARE UPDATE
In the CVM-A you can update:
The device software,
The rmware of the Datalogger Module
The expansion modules software.
The following is required to upgrade the software of the device and the expansion modules:
The microSD card inserted on one side of the device.
The update les, which can be found on the Circutor web site.
Select the update files according to the model of the device, CVM-A1000 or
CVM-A1500.
A PC so as to update the les in the microSD card.
Before carrying out any updating process, the device must be unplugged from
all power supplies, both the power supply for the device and measurement.
On the side of the device there is a slot with the microSD card; to access it simply press the
microSD card and it will be released from the slot.
Figure 404: Position of slot with the microSD card�
346
CVM-A1000 - CVM-A1500
Instruction Manual
To Next Page
Loading...
