Cisco 12000 - Chassis Configuration; Viewing the Chassis Configuration Window

4-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Chassis Configuration
Chassis Configuration
The Chassis Configuration window allows you to view and configure parameters, commission or
decommission, and switch global performance logging on or off for the selected chassis. The Chassis
Configuration (Additional Descriptions tab) allows you to specify additional description information for
a selected chassis. The Description 1 and Description 2 attributes allow you to enter any additional text
descriptions for identification purposes.
The Chassis Configuration section covers the following areas:
• Viewing the Chassis Configuration Window
• Commissioning a Chassis
• Decommissioning a Chassis
• Starting Global Performance Logging
• Stopping Global Performance Logging
• Entering Additional Descriptions for a Selected Chassis
• Device Management Tab in Configuration Window
• Chassis Configuration Window—Detailed Description
Viewing the Chassis Configuration Window
To view the Chassis Configuration window, proceed as follows:
Step 1 Right click on the chassis object and select the Configuration>Chassis Configuration option. See
Table 4-1 on page 4-2 for information on which objects allow you to launch the Chassis Configuration
window. The Chassis Configuration window appears, with the Configuration tab displayed.