9-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
ATM Interface Status
ATM Receive Status
The ATM Receive Status area is not applicable to Cisco 12000/10720 Router Manager.
Physical Layer Status
The Physical Layer Status area contains the following fields:
Physical Interface Status—Not applicable to Cisco 12000/10720 Router Manager.
Clock Source Status—Not applicable to Cisco 12000/10720 Router Manager.
Physical Port Type—Type of physical layer medium on this interface.
ATM Port Status
The ATM Port Status area contains the following fields:
Number of VPCs—Not applicable to Cisco 12000/10720 Router Manager.
Admin Address—Not applicable to Cisco 12000/10720 Router Manager.
Number of VCCs—Number of PVCs and SVCs at this interface.
ATM Address Type—Not applicable to Cisco 12000/10720 Router Manager.
Number of PVCs—Not applicable to Cisco 12000/10720 Router Manager.
NSAP (Network Service Access Point) Address—NSAP address of the interface.
Number of PVPs—Not applicable to Cisco 12000/10720 Router Manager.
Configured VP Interface—Not applicable to Cisco 12000/10720 Router Manager.
Number of PCs—Not applicable to Cisco 12000/10720 Router Manager.
SVC Minimum VCI—Not applicable to Cisco 12000/10720 Router Manager.
Number of SCs—Not applicable to Cisco 12000/10720 Router Manager.
Active SVPs—Not applicable to Cisco 12000/10720 Router Manager.
Total Connections—Not applicable to Cisco 12000/10720 Router Manager.
Active SVCs—Not applicable to Cisco 12000/10720 Router Manager.
Action
The Action area displays a single Show Connections button. When you choose the Show Connections
button an Action report window appears displaying IOS information regarding the status of the
connections on the selected interface.
To Next Page
Loading...
