Cisco 12000 - Deploying a VLAN and a Sub-Interface Object under an Existing Domain

13-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 13 Managing VLANs
Deploying VLAN objects
Figure 13-8 Deployment Wizard—Summary
Step 9
Click Finish (when the Deployment Summary information is displayed) to complete deployment and
close the Deployment Wizard - Summary window. The new domain object (that is, Domain-2) is created
and displayed in the Map Viewer window under the VLAN view.
Deploying a VLAN and a Sub-Interface Object Under an Existing Domain
To deploy a VLAN object and a VLAN sub-interface object from a domain, proceed as follows:
Note Make sure that the IOS usernames and passwords are correctly set in the Management Information.
Step 1 Place the cursor on the domain to determine the objects you can deploy in the VLAN view.
Step 2 Click and hold down the right mouse button.
Step 3 Choose Deployment>Cisco 12000/10720 Manager >Deploy VLAN Related Objects.
Figure 13-9 Deploying a VLAN object