CHAPTER
10-1
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
10
Interface Performance
This chapter describes how to view performance information for each of the interfaces on the
Cisco 12000/10720 Routers you are managing, using the Cisco 12000/10720 Router Manager
application.
There are two performance options in Cisco 12000/10720 Router Manager: the Interface Performance
windows and the Performance Manager application. Performance Manager displays historical data as
well as current data in the form of a line chart, bar chart, or table; Interface Performance windows display
only current data in a raw numerical format.
Note See Chapter 20, “Performance Management and Historical Data” for information on viewing historical
performance information for a selected chassis, module, or interface using the Performance Manager.
This chapter contains the following information:
• Interfaces and Related Technology-Specific Windows
• Launching the Interface Performance Windows
• Generic Interface Performance
• SONET Interface Performance
• DS3/E3 Interface Performance
• Ethernet Interface Performance
• SRP Performance
• SRP Side Performance
Interfaces and Related Technology-Specific Windows
Interfaces on line cards can support multiple technologies. Performance windows are
technology-specific. For example, a POS interface supports two technologies: Generic and SONET.
Therefore, to view the performance of a POS interface, you need to view two windows: the Generic
Interface Performance window, and the SONET Interface Performance window.
This same process is applicable to all different types of interfaces: POS, DS-3, ATM, SRP or Ethernet.
To Next Page
Loading...
