Cisco 12000 - ATM PVC Configuration; Viewing the ATM VCL Configuration Window

12-30
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 12 Managing ATM Connections
ATM PVC Configuration
ATM PVC Configuration
The PVC Configuration section covers the following areas:
• Viewing the ATM VCL Configuration Window
• Connecting or Disconnecting a PVC
• Decommissioning or Re-Commissioning a PVC
• ATM OAM Ping
• ATM VCL Configuration Window—Detailed Description
Viewing the ATM VCL Configuration Window
To view the ATM VCL Configuration window, proceed as follows:
Step 1 Right-click on a selected interface, then choose Cisco 12000/10720 Manager>Configuration>
ATM>VCL Configuration. The ATM VCL Configuration window appears, with the Configuration tab
displayed.
Figure 12-25 ATM VCL Configuration Window—Configuration Tab
Step 2
Choose the Chassis, Module, Interface, and Cisco VCL (PVC) from the list boxes at the left of the
window.
Not applicable to Cisco 12000/10720 Router Manager