Cisco 12000 - Creating an HSRP Profile

7-9
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 7 Interface Profiles
Creating an HSRP Profile
Creating an HSRP Profile
To create an HSRP profile, proceed as follows:
Step 1 Choose the Cisco 12000/10720 Manager>Configuration>IP>HSRP Configuration Profile option
from an Ethernet interface object. See Table 7-2 on page 7-2 for information on which objects allow you
to launch the HSRP Profile window.
Figure 7-5 HSRP Profile Window
See “HSRP Profile Window—Detailed Description” section on page 7-11 for further information on the
parameters displayed in this window.
Step 2 Click Create. A Prompt window appears (see Figure 7-9) for you to enter a name for the profile.
Figure 7-6 Prompt Window