Cisco 12000 - VRF Fault Management; VRF Status; Viewing the VRF Status Window

16-15
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
Apply Status
The Apply Status area displays the following information:
Status of Last Apply—Displays the result of the last (Apply/Remove) operation.
VRF Fault Management
The VRF Fault Management section covers the following areas:
• VRF Status
• Interface VRF Status
• VPN Status
• VRF Object Status
VRF Status
The VRF Status window displays basic information for all the VRFs on a selected chassis. The VRF
Status section describes the following information:
• Viewing the VRF Status Window
• VRF Status Window—Detailed Description
Viewing the VRF Status Window
To view the VRF Status window, proceed as follows:
Step 1 Right click on an appropriate object and choose Fault> MPLS> VRF Status. See Table 16-1 on
page 16-2 for information on which objects allow you to launch the VRF Status window. The VRF Status
window appears, with the General tab displayed.