10-7
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 10 Interface Performance
Generic Interface Performance
Stopping Performance Logging for a Selected Interface
To stop performance logging for a selected interface, proceed as follows:
Step 1 Open the Interface Performance window. See “Viewing the Generic Interface Performance Window”
section on page 10-3 for further details.
Step 2 Choose a Chassis, Module, and Interface from the lists displayed at the left of the window.
Step 3 Choose Stop to stop performance logging for the selected interface. A window appears for you to
confirm that you wish to stop performance logging.
Figure 10-6 Stop Performance Logging Confirmation Window
Step 4 Click Yes to stop performance logging for the selected interface. An Action Report window appears to
confirm that performance logging has been stopped for the selected interface.
Figure 10-7 Action Report Window
Step 5 Click Close to close the Action Report window.
Step 6 Choose Close from the File menu to close the Interface Performance window.
To Next Page
Loading...
