10-6
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 10 Interface Performance
Generic Interface Performance
To start performance logging for a selected interface, proceed as follows:
Step 1 Open the Interface Performance window. See “Viewing the Generic Interface Performance Window”
section on page 10-3 for further details.
Step 2 Choose a Chassis, Module, and Interface from the lists displayed at the left of the window.
Step 3 Click Start to begin performance logging for the selected interface. A window appears for you to
confirm that you wish to start performance logging.
Figure 10-4 Start Performance Logging Confirmation Window
Step 4 Click Yes to begin performance logging for the selected interface. An Action Report window appears to
confirm that performance logging has started.
Figure 10-5 Action Report Window
Step 5
Click Close to close the Action Report window.
Step 6 Choose File > Close to close the Interface Performance window.
See Chapter 20, “Performance Management and Historical Data”chapter for information on viewing
historical performance information for a selected interface.
To Next Page
Loading...
