Cisco 12000 - Entering Additional Descriptions for a Selected Chassis

4-11
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Chassis Configuration
Entering Additional Descriptions for a Selected Chassis
Note Entering additional descriptions for a chassis is optional.
To enter additional descriptions for a selected chassis, proceed as follows:
Step 1 Open the Chassis Configuration window. See“Viewing the Chassis Configuration Window” section on
page 4-7 for further details.
Figure 4-6 Chassis Configuration Window—Additional Descriptions Tab
Step 2
Select the relevant Chassis from the list displayed at the left of the window.
Step 3 Choose the Additional Descriptions tab.
Step 4 Enter additional descriptions into the Descriptions 1 and Descriptions 2 areas, as required.