Cisco 12000 - Virtual Tributary; SRP Interface Status; Viewing the SRP Interface Status Attributes

9-17
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
SRP Interface Status
Virtual Tributary
The Virtual Tributary tab is not applicable to Cisco 12000/10720 Router Manager.
SRP Interface Status
The SRP Interface Status section covers the following:
• Viewing the SRP Interface Status Attributes
• SRP Interface Status Window—Detailed Description
Viewing the SRP Interface Status Attributes
To view the SRP Interface Status window, proceed as follows:
Step 1 Right click on the SRP interface and choose Cisco 12000/10720 Manager>Fault>SRP>Status. See
Table 9-2 on page 9-2 for information on which objects allow you to launch the SRP Interface Status
window.
Figure 9-9 SRP Interface Status Window