16-19
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
Interface VRF Status
The Interface VRF Status window displays the interfaces on a chassis which are associated with VRFs
and their associated VRF information.
The Interface VRF Status section covers the following areas:
• Viewing the Interface VRF Status Window
• Interface VRF Status Window—Detailed Description
Viewing the Interface VRF Status Window
To view the Interface VRF Status window, proceed as follows:
Step 1 Right click on a chassis object and choose Fault> MPLS> Interface VRF Status. See Table 16-1 on
page 16-2 for information on which objects allow you to launch the Interface VRF Status window. The
Interface VRF Status window appears, with the Interface VRF Association tab displayed:
Figure 16-13 Interface VRF Status Window
Step 2
Choose a Chassis from the list box displayed at the left of the window. The status information appears
for the selected chassis. For further information, see “VRF Status Window—Detailed Description”
section on page 16-16.
To Next Page
Loading...
