Cisco 12000 - Removing an OSPF Process

14-50
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
OSPF Configuration
Removing an OSPF Process
This section explains the procedure to remove an OSPF process from the device. To remove an OSPF
process, proceed as follows:
Step 1 Open the OSPF configuration window. See “Viewing the OSPF Configuration Window” section on
page 14-47 for further details.
Step 2 Choose the OSPF process from the OSPF Process list.
Step 3 Click on the Remove OSPF Processes button. An action report appears.
Figure 14-33 Remove OSPF—Alert
Step 4 Click on Yes to remove the OSPF process. An action report summarizing the Remove OSPF operation
is displayed.
Figure 14-34 Action Report
Note Multiple OSPF processes can be selected and removed from the device.