Cisco 12000 - IP Extended Tab

11-16
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 11 Layer 3 QoS
Access List Configuration
IP Extended Tab
The IP Extended tab displays a single IP Extended area. The IP Extended area is further split into three
sub-areas: Dynamic List, Source, and Destination.
Figure 11-6 Access List Configuration Window—IP Extended Tab
IP Extended
The IP Extended area contains two fields:
Access Action—Action to be taken if the conditions are matched. Possible actions are deny and permit.
Protocol Name—Name or number of an IP protocol. Valid protocol number values are 0 to 255. Valid
protocol names are as follows:
Table 11-2 Valid Protocol Names
Valid Protocol Names
ahp ipinip
eigrp nos
gre ospf
icmp pcp
igmp pim
igrp tcp
ip udp
esp