Cisco 12000 - Enabling;Disabling Traps on the Device

17-3
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 17 MPLS Trap Management
Enabling/Disabling Traps on the Device
Enabling/Disabling Traps on the Device
To enable or disable MPLS trap generation on a selected chassis, proceed as follows:
Step 1 Open the MPLS Trap Configuration window. Right click on an appropriate object and select the Cisco
12000/10720 Manager> Configuration> Chassis> MPLS> MPLS Trap Configuration option. See
Table 17-2 for information on which objects allow you to launch the MPLS Trap Configuration window.
The MPLS Trap Configuration window appears, with the Traps tab displayed.
Figure 17-1 MPLS Trap Configuration Window—Traps Tab
Table 17-2 Launching the MPLS Trap Configuration Window
Cisco 12000/10720 Router
Manager Window/Task
Objects (that can be selected) to Open the Window
Menu Options to Select to Open Window
Site Chassis Module Interface VRF
12000
Series
10720
Enabling/Disabling
Traps on the Device
Yes Yes Yes No No No Cisco 12000/10720 Manager>
Configuration> Chassis> MPLS> MPLS
Trap Configuration