8-22
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 8 Interface Configuration
SRP Interface Configuration
SRP Interface Configuration
The SRP Interface Configuration window allows you to configure a selected SRP Interface. The SRP
Interface Configuration section covers the following areas:
• Viewing the SRP Interface Configuration Attributes
• Configuring a SRP Interface
• SRP Interface Configuration Window—Detailed Description
Viewing the SRP Interface Configuration Attributes
To view the attributes in the SRP Interface Configuration window, proceed as follows:
Step 1 Choose the Cisco 12000/10720 Manager>Configuration>SRP>Configuration option from a SRP
interface object to launch the SRP Configuration window. Refer to Table 8-2 on page 8-2 for information
on which objects allow you to launch the SRP Interface Configuration window.
Figure 8-8 SRP Interface Configuration Window
Step 2 Choose a Chassis, Module, and SRP Interface from the lists displayed at the left side of the window to
view the configuration details of the SRP interface.
To Next Page
Loading...
