Cisco 12000 - Downloading, Opening, or Editing the Running Configuration from a Selected Chassis

4-36
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
Configuration Editor
Figure 4-18 Configuration Editor Window
Step 2
Choose a Chassis from the list displayed at the left of the window. For further information on the fields
displayed in this window, see “Configuration Editor Window—Detailed Description” section on
page 4-37.
Downloading, Opening, or Editing the Running Configuration from a Selected Chassis
To download, open or edit the running configuration configuration from a selected chassis, proceed as
follows:
Step 1 Open the Configuration Editor window, see “Viewing the Configuration Editor Window” section on
page 4-35 for further details.
Step 2 Choose a Chassis from the list displayed at the left of the window.
Step 3 Click Upload. A vi editor window appears, with the running configuration for the selected chassis
displayed.
Step 4 Edit the running configuration as desired. To search for specific text within the running configuration
file, see Searching in the Configuration Editor.
Caution If you wish to delete a line in the uploaded configuration, you must type “no” at the
beginning of the line. If order is a concern, deleting a line might cause problems, so use
extreme discretion when deleting a line.