Cisco 12000 - SRP Topology Map-Detailed Description; Topology Map

9-21
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 9 Interface Status
SRP Topology Map
Figure 9-11 SRP Topology Map
Step 2
Choose a Chassis, Module and SRP Interface from the list boxes displayed on the left side of the
window. The topology details of the selected SRP interface appears in the table on the right side of the
window.
SRP Topology Map—Detailed Description
The SRP Topology Map window displays the Topology Map area.
Topology Map
Hops—Displays either 0 or a positive integer. This value determines the number of hops the next node
is away from the current node, around the ring, in the clock wise direction.
Remote Node MAC Address—Displays the 48-bit MAC address of the remote node.
Wrap Status—Displays the IPS status of the remote node.
Name—Displays the host name of the remote node.