4-40
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 4 Managing Chassis
RPR Status
Switch Over Tab
Active RP—Displays the slot number of the active Route Processor.
Actions
Switch Over—Choose Switch Over to force a RP from standby to active.
Note A user can forcefully switchover and make the standby RP to an Active one, by clicking on “Switch
Over”.
RPR Status
Note This feature is not available with the Cisco 10720 Routers.
The RPR Status section covers the following areas:
• Viewing the RPR Status Window
• RPR Status Window—Detailed Description
Viewing the RPR Status Window
To view the RPR Status window, proceed as follows:
Step 1 Right click (on a relevant object icon in the Map Viewer window or from an object pick list) and select
Fault>RPR Status option. See Table 4-1 on page 4-2 for information on which objects allow you to
launch the RPR Status window.
To Next Page
Loading...
