Cisco 12000 - Page 14

Contents
xiv
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
WRED ToFab Configuration 11-32
Creating a ToFab Policy 11-32
Editing an Existing ToFab policy 11-33
Deleting an Existing ToFab policy 11-34
WRED ToFab Policy Configuration Window—Detailed Description 11-35
ToFab Policy Configuration tab 11-35
Slot Table Parameters 11-35
Actions 11-35
Slot-CosQ Groups 11-35
WRED Rx Configuration 11-36
Associating a ToFab Policy to a Line card 11-36
Disassociating a ToFab Policy from a Line card 11-37
Changing the Association of a ToFab Policy 11-37
WRED Rx Configuration Window—Detailed Description 11-38
Rx Configuration Tab 11-38
Actions 11-38
Associated slot—Table Info 11-38
Apply Status 11-38
CHAPTER 12 Managing ATM Connections 12-1
ATM Connections Supported by Cisco 12000/10720 Router Manager 12-2
PVC Connections 12-2
Terminating PVC Connections 12-2
SVC Connections 12-3
Launching the ATM Connections Windows 12-4
ATM Connection Synchronization 12-4
Device_is_Master (default policy) 12-5
Normal Policy 12-6
CEMF_is_Master_After_First_Sync 12-6
Creating ATM Connections 12-7
Uploading Existing ATM Connections and QoS Profiles 12-7
Naming Convention for the Uploaded Connection Objects 12-8
Configuring the Management Password Information 12-8
Without configuring the Management Password Information 12-8
Viewing the ATM Connection Upload Window 12-9
Uploading Existing ATM Connections and ATM QoS Profiles 12-10
ATM Connection Upload Window—Detailed Description 12-11
Connection Upload Tab 12-11
Managing ATM QoS Profiles 12-12