7-13
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 7 Interface Profiles
Creating a POS Interface Profile
Figure 7-8 POS Profile Dialog —POS Config Tab
See “POS Profile Window—Detailed Description” section on page 7-15 for further information on the
parameters displayed in this window.
Step 2 Click Create Profile. A Prompt window appears (see Figure 7-9) for you to enter a name for the new
profile.
Figure 7-9 Prompt Window
Step 3 Enter a name for the new profile in the Enter profile name data entry box.
Note Each profile created must have a unique name. Do not insert spaces into a profile
name. When you choose a profile name, it is highly recommended to use a naming
convention that describes the profile type. For example, a POS profile might be
called POS1.
To Next Page
Loading...
