12-19
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 12 Managing ATM Connections
Deploying ATM Connection Objects
Figure 12-12 Deployment Wizard—Templat es
Step 2
Choose the template you wish to use, either: Cisco PVC under ATM EndPoint or Cisco PVC under ATM
EndPoint on Sub Interface, and choose either auto named or user named (for details on auto vs. user
named, see “Manually Deploying Modules” section on page 3-30). Make sure your selection is
highlighted before clicking Forward.
Figure 12-13 Deployment Wizard—Object Parameters
Step 3
Enter the number of PVC connections you want to create.
Step 4 Enter a profile name for the PVC object.
Step 5 Enter the Subscriber ID for the PVC object.
To Next Page
Loading...
