14-24
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 14 Routing
BGP Address-Family Synchronization
To synchronize the BGP address families, proceed as follows:
Step 1 Right click on a chassis and choose Configuration>BGP>BGP Address-Family Synchronization. See
Table 14-1 on page 14-2 for information on which objects allow you to launch the BGP Address-Family
Synchronization window.
Note You can choose multiple chassis (from the chassis list displayed in the left side of the BGP
Address-Family Synchronization window) which allows you to synchronize all the selected
chassis simultaneously.
Figure 14-15 BGP Address-Family Synchronization Window
Step 2 Choose Synchronize to initiate the synchronization process. An Action Report appears summarizing the
synchronization process.
To Next Page
Loading...
