15-45
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 15 MPLS Management
Fault Management for MPLS Traffic Engineering
Resource Table
This table allows a manager to specify which resources are desired for an MPLS tunnel. This table also
allows several tunnels to point to a single entry in this table, implying that these tunnels should share
resources.
The Resource Table area displays the following information:
Resource Max Rate—The maximum rate in bits/second.
Resource Mean Rate—This object is copied into an instance of mplsTrafficParamMeanRate in the
mplsTrafficParamTable.
Resource Max Burst Size—The maximum burst size in bytes.
Resource Storage Type—Displays the storage type for this object.
Performance Tab
The Performance tab (see Figure 15-25) displays the tunnel performance statistics. It provides the packet
and byte counters for each tunnel. The Performance tab displays the Tunnel Performance area.
Figure 15-25 MPLS Tunnel Information Window—Performance Tab
Tunnel Performance
The Select Tunnel area displays the following information:
Tunnel Id—Displays the tunnel identification number.
To Next Page
Loading...
