16-24
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 16 MPLS VRF Management
VRF Fault Management
Figure 16-16 VPN Status Window—Route Targets Tab
VRF Route Targets
The VRF Route Targets area displays a table. This table specifies per-VRF route target association. Each
entry identifies a connectivity policy supported as part of a VPN. The VRF Route Targets table with the
following information:
VRF—Name of VRF which is responsible for VPN target communication.
Route Target—Route target distribution policy.
Route Target Descr—Description of the route target.
Route Target Type—The route target export distribution type.
Route Target Index—Auxiliary index for Route Targets configured for a particular VRF.
To Next Page
Loading...
