3-44
Cisco 12000/10700 v3.1.1 Router Manager User Guide
OL-4455-01
Chapter 3 Getting Started
Deployment
To deploy a line card of any type, proceed as follows:
Step 1 Right click on the chassis object under which you want to deploy the line card, then choose
Deployment>Cisco 12000/10720 Manager>Module>ATM or POS or Ethernet or DS-3, then choose
the exact type of line card to be deployed (for example, OC-3 4 Port or OC12 1 Port). Now, choose the
exact variant (for example, SM, or MM) if applicable.
The Deployment Wizard appears.
Figure 3-30 Deployment Wizard—Templates
Step 2
Choose the type of deployment (either auto-named or user-named).
Step 3 Click Forward.
Note The sample windows displayed are for an ATM OC-3 4 port MM line card.
To Next Page
Loading...
