Name: Cisco 2950 - Catalyst Switch
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6-10

Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide

78-11380-10

Chapter6 Configuring IE2100 CNS Agents

Configuring CNS Embedded Agents

Step 6

ip route network-number Establish a static route to the Configuration Registrar

whose IP address is network-number.

Step 7

cns id interface num {dns-reverse | ipaddress |

mac-address} [event]

cns id {hardware-serial | hostname | string string} [event]

Set the unique eventID or configID used by the

Configuration Registrar.

• For interface num, enter the type of interface–for

example, Ethernet, Group-Async, Loopback, or

Virtual-Template. This setting specifies from

which interface the IP or MAC address should be

retrieved to define the unique ID.

• For {dns-reverse | ipaddress | mac-address}

enter dns-reverse to retrieve the host name and

assign it as the unique ID, enter ipaddress to use

the IP address, or enter mac-address to use the

MAC address as the unique ID.

• (Optional) Enter event to set the ID to be the

event-id value used to identify the switch.

• For {hardware-serial | hostname|

string string}, enter hardware-serial to set the

switch serial number as the unique ID, enter

hostname (the default) to select the switch host

name as the unique ID, or enter an arbitrary text

string for string string as the unique ID.

Command Purpose

Questions and Answers:

Need help?

Do you have a question about the Cisco 2950 - Catalyst Switch and is the answer not in the manual?

Cisco 2950 - Catalyst Switch Specifications

General