Index
IN-12
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
G
GBICs
1000BASE-LX/LH module
1-11
1000BASE-SX module 1-11
1000BASE-ZX module 1-11
GigaStack module 1-11
security and identification 32-14
get-bulk-request operation 28-3
get-next-request operation 28-3, 28-4
get-request operation 28-3, 28-4
get-response operation 28-3
Gigabit Interface Converters
See GBICs
GigaStack GBIC
fast transition of redundant link
16-5
See also GBICs
global configuration mode
2-2
guide
audience
xxix
purpose of xxix
guide mode 4-5
H
HC (candidate switch) 7-21
hello time
MSTP
15-19
STP 14-21
help, for the command line 2-3
history
changing the buffer size
2-5
described 2-5
disabling 2-6
recalling commands 2-6
history table, level and number of syslog messages 27-10
host names
abbreviations appended to
7-21
in clusters 7-15
hosts, limit on dynamic ports 17-31
HP OpenView 1-8
HSRP
automatic cluster recovery
7-14
cluster standby group considerations 7-12
See also clusters, cluster standby group, and standby
command switch
I
ICMP ping
executing
32-15
overview 32-15
IDS, using with SPAN and RSPAN 25-2
IE2100
CNS embedded agents
described
6-5
enabling automated configuration 6-6
enabling configuration agent 6-9
enabling event agent 6-8
Configuration Registrar
configID, deviceID, hostname
6-3
configuration service 6-2
described 6-1
event service 6-3
described 1-8
support for 1-3
IEEE 802.1p 19-1
IGMP
joining multicast group
21-3
join messages 21-3
leave processing, enabling 21-10
leaving multicast group 21-4
queries 21-3
report suppression
described
21-5
disabling 21-11
throttling action 21-22
IGMP, joining multicast group 21-3
To Next Page
Loading...
