Index
IN-20
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
port-based authentication (continued)
configuring
802.1x authentication
10-11, 10-19
guest VLAN 10-18
host mode 10-17
manual re-authentication of a client 10-15
periodic re-authentication 10-14
quiet period 10-15
RADIUS server 10-14
RADIUS server parameters on the switch 10-13
switch-to-client frame-retransmission number 10-16
switch-to-client retransmission time 10-15
default configuration 10-9
described 10-1
device roles 10-2
displaying statistics 10-21
EAPOL-start frame 10-3
EAP-request/identity frame 10-3
EAP-response/identity frame 10-3
enabling
802.1x with guest VLAN
10-8
802.1x with port security 10-6, 10-17
802.1x with VLAN assignment 10-7, 10-12
802.1x with voice VLAN 10-7
encapsulation 10-2
initiation and message exchange 10-3
method lists 10-11, 10-19
per-user ACLs
AAA authorization
10-19
ports
authorization state and dot1x port-control
command
10-4
authorized and unauthorized 10-4
resetting to default values 10-18
software upgrade changes 10-11
switch
as proxy
10-2
RADIUS client 10-2
topologies, supported 10-5
port-based authentication (continued)
upgrading from a previous release
30-14
VLAN assignment
AAA authorization
10-19
port blocking 22-5
port-channel
See EtherChannel
Port Fast
described
16-2
enabling 16-13
mode, spanning tree 17-27
support for 1-5
port membership modes, VLAN 17-3
port priority
MSTP
15-17
STP 14-17
port profile, locking 13-15
ports
access
11-2
blocking 22-5
duplex mode 13-11
dynamic access 17-3
forwarding, resuming 22-6
LRE 13-1
priority 30-8
protected 22-4
secure 22-7
speed, setting and checking 13-11
static-access 17-3, 17-11
switch 11-1
trunks 17-15
VLAN assignments 17-11
See also CPE
See also LRE ports
port scheduling
30-8
To Next Page
Loading...
