Index
IN-30
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
TFTP
configuration files
downloading
B-11
preparing the server B-11
uploading B-12
configuration files in base directory 5-6
configuring for autoconfiguration 5-6
image files
deleting
B-23
downloading B-22
preparing the server B-21
uploading B-23
limiting access by servers 28-14
time
See NTP and system clock
time-range command
29-15
time ranges in ACLs 29-15
timestamps in log messages 27-7
time zones 8-13
Token Ring VLANs
support for
17-5
VTP support 18-4
Topology view
described
4-2, 4-14
TOS 1-6
traceroute, Layer 2
and ARP
32-17
and CDP 32-17
described 32-16
IP addresses and subnets 32-17
MAC addresses and VLANs 32-17
multicast traffic 32-17
multiple devices on a port 32-17
unicast traffic 32-16
usage guidelines 32-17
traffic
blocking flooded
22-5
fragmented 29-3
unfragmented 29-3
traffic policing 1-6
transparent mode, VTP 18-3, 18-12
trap-door mechanism 5-2
traps
configuring MAC address notification
8-24
configuring managers 28-11
defined 28-3
enabling 8-24, 28-11
notification types 28-11
overview 28-1, 28-4
troubleshooting
connectivity problems
32-15
detecting unidirectional links 23-1
displaying crash information 32-23
GBIC security and identification 32-14
LRE ports 32-18
with CiscoWorks 28-4
with debug commands 32-19
with ping 32-15
with system message logging 27-1
trunk ports
configuring
17-18
defined 11-2
trunks
allowed-VLAN list
17-19
load sharing
setting STP path costs
17-24
using STP port priorities 17-22, 17-23
native VLAN for untagged traffic 17-21
parallel 17-24
pruning-eligible list 17-20
to non-DTP device 17-15
VLAN 1 minimization 17-19
trusted boundary 30-23
twisted-pair Ethernet, detecting unidirectional links 23-1
type-of-service
See TOS
To Next Page
Loading...
