Cisco 2950 - Catalyst Switch - Page 708

Index
IN-32
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
VLAN database
and startup configuration file
17-7
and VTP 18-1
VLAN configuration saved in 17-7
VLANs saved in 17-4
vlan database command 17-6
vlan global configuration command 17-6
VLAN ID, discovering 8-28
VLAN management domain 18-2
VLAN Management Policy Server
See VMPS
VLAN membership
confirming
17-29
modes 17-3
VLAN Query Protocol
See VQP
VLANs
adding
17-8
adding to VLAN database 17-8
aging dynamic addresses 14-9
allowed on trunk 17-19
and spanning-tree instances 17-2, 17-6, 17-13
configuration guidelines, normal-range VLANs 17-5
configuration options 17-6
configuring 17-1
configuring IDs 1006 to 4094 17-12
creating in config-vlan mode 17-8
creating in VLAN configuration mode 17-9
default configuration 17-7
deleting 17-10
described 11-3, 17-1
displaying 17-14
extended-range 17-1, 17-12
illustrated 17-2
modifying 17-8
native, configuring 17-21
normal-range 17-1, 17-4
parameters 17-4
port membership modes 17-3
VLANs (continued)
static-access ports
17-11
STP and 802.1Q trunks 14-10
supported 17-2
Token Ring 17-5
trunks, VLAN 1 minimization 17-19
VTP modes 18-3
VLAN Trunking Protocol
See VTP
VLAN trunks
17-15
VMPS
administering
17-30
configuration example 17-31
configuration guidelines 17-27
default configuration 17-27
description 17-25
dynamic port membership
described
17-26
reconfirming 17-29
troubleshooting 17-31
entering server address 17-28
mapping MAC addresses to VLANs 17-25
monitoring 17-30
reconfirmation interval, changing 17-29
reconfirming membership 17-29
retry count, changing 17-30
voice VLAN
Cisco 7960 phone, port connections
19-1
configuration guidelines 19-3
configuring IP phones for data traffic
override CoS of incoming frame
19-5
trust CoS priority of incoming frame 19-6
configuring ports for voice traffic in
802.1p priority tagged frames
19-4
802.1Q frames 19-4
connecting to an IP phone 19-3
default configuration 19-2
described 19-1
displaying 19-6