2-214
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
qos aggregate-policer
Examples This example shows how to configure a QoS aggregate policer to allow a maximum of 100,000 bits per
second with a normal burst size of 10,000 bytes, to transmit when these rates are not exceeded, and to
drop packets when these rates are exceeded:
Switch(config)# qos aggregate-policer micro-one 100000 10000 conform-action transmit exceed action drop
Switch(config)#
Related Commands show qos aggregate policer