Cisco 4500M

2-217
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
78-16201-01
Chapter2Cisco IOS Commands for the Catalyst 4500 Series Switches
qos dbl
Command History
Examples This example shows how to enable DBL globally on the switch:
Switch(config)# qos dbl
Global DBL enabled
Switch(config)#
This example shows how to enable DBL in the QoS policy-map class configuration mode:
Switch(config)# class-map c1
Switch(config-cmap)# policy p1
Switch(config-pmap)# class c1
Switch(config-pmap-c)# dbl
Switch(config-pmap-c)#
Related Commands show qos dbl
Release Modification
12.1(13)EW Support for this command was introduced on the Catalyst 4500 series switch.