Cisco 8961 - Voip WLAN Deployment; Supported Access Points

Cisco Unified IP Phone
configuration
Cisco AP configuration
LEAP or Auto (AKM)TKIPWPA with optional
CCKM
LEAP
WPA
LEAP or Auto (AKM)AESWPA2LEAP
WPA2
EAP-FASTWEPOptional CCKMEAP-FAST
802.1x
EAP-FASTTKIPWPA
Optional CCKM
EAP-FAST with WPA
EAP-FASTAESWPA2EAP-FAST with WPA2
Auto (AKM)TKIPWPA-PSKWPA-PSK
Auto (AKM)AESWAP2-PSKWPA2-PSK
For additional information about Cisco WLAN Security, see http://www.cisco.com/en/US/products/hw/
wireless/ps430/prod_brochure09186a00801f7d0b.html.
For more information about configuring authentication and encryption schemes on APs, see the Cisco Aironet
Configuration Guide for your model and release under the following URL:
http://www.cisco.com/cisco/web/psa/configure.html?mode=prod&level0=278875243
Related Topics
Cisco Unified Wireless AP Interactions, on page 90
Authentication Methods, on page 94
Encryption Methods, on page 95
Cisco Unified Communications Manager Interaction, on page 93
VoIP Wireless Network Components, on page 90
VoIP WLAN Deployment, on page 97
VoIP WLAN Deployment
This section provides configuration guidelines for deploying Cisco Unified IP Phones in the WLAN.
Supported Access Points
The wireless Cisco Unified IP Phone 9971 is supported on both the Cisco autonomous and unified solutions.
Minimum and recommended versions are:
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
97
VoIP Wireless Network
VoIP WLAN Deployment
REVIEW DRAFT - CISCO CONFIDENTIAL