Set SW Port Configuration Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the SW Port Configuration option and press Select.
Step 3
Scroll to the setting that you want and press Select.
Set PC Port Configuration Field
Procedure
Step 1
Unlock network configuration options.
Step 2
Scroll to the PC Port Configuration option and press Select.
Step 3
Scroll to the setting that you want and press Select.
Wireless Setup menu
The Wireless Setup menu provides options on the Cisco Unified IP Phone 9971 to view and make a variety
of network settings. The following table describes these options and, where applicable, explains how to change
them.
You can configure the Wireless settings only on the Cisco Unified IP Phone keypad. You must use the
AC adapter when you use the Cisco Unified IP Phone in Wireless mode. Wireless is disabled when Ethernet
is connected.
Note
The Wireless Setup option does not appear in the Network Setup menu when WiFi is disabled on the
Cisco Unified Communications Manager.
Note
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
108
Cisco Unified IP Phone Settings
Set SW Port Configuration Field
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
Need help?
General
