â—¦
Debug Display: Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting.
•
Streaming Statistics: Includes the Audio and Video statistics, Stream 1, Stream 2, Stream 3, Stream 4,
Stream 5 and Stream 6 hyperlinks, which display a variety of streaming statistics.
Related Topics
Device Information, on page 250
Network Setup, on page 251
Network Statistics, on page 255
Device Logs, on page 258
Streaming Statistics, on page 259
Control web page access
For security purposes, access to the web pages for a phone is disabled by default. This practice prevents access
to the web pages that are described in this chapter and to the Cisco Unified Communications Manager User
Options web pages.
Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone
web pages. Disabling web access also affects any serviceability application that relies on web access, such
as CiscoWorks.
Note
To enable or disable access to the web pages for a phone, perform these steps from Cisco Unified
Communications Manager Administration:
Procedure
Step 1
Choose Device > Phone.
Step 2
Specify the criteria to find the phone and select Find, or select Find to display a list of all phones.
Step 3
Select the device name to open the Phone Configuration window for the device.
Step 4
Scroll to the Product Specific Configuration area.
Step 5
To enable access, from the Web Access drop-down list, choose Enabled.
Step 6
To disable access, from the Web Access drop-down list, choose Disabled.
Step 7
Select Apply Config.
Cisco Unified IP Phone and HTTP or HTTPS Protocols
The Cisco Unified IP Phone can be configured to use:
•
HTTPS protocol only
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
249
Remote Monitoring
Control web page access
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
Need help?
General
