EasyManuals Logo

Cisco 8961 Administration Guide

Cisco 8961
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
DescriptionItem
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
•
Device Type: Indicates hardware type. For example, phone displays for
all phone models.
•
Device Description: Displays the name of the phone associated with the
indicated model type.
•
Product Identifier: Specifies the phone model.
•
Serial Number: Displays the unique serial number of the phone.
UDI
Cisco Unique Device Identifier (UDI) of the KEM.Key Expansion Module
UDI
Time for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Time
Time zone for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Time Zone
Date for the Date/Time Group to which the phone belongs. This information
comes from Cisco Unified Communications Manager.
Date
Indicates if the Federal Information Processing Standard (FIPS) Mode is enabled.FIPS Mode Enabled
Network Setup
The Network Setup area on a phone web page displays network setup information and information about
other phone settings. The following table describes these items.
You can view and set many of these items from the Network Setup menu on the Cisco Unified IP Phone. For
more information, see Cisco Unified IP Phone Settings, on page 101.
To display the Network Setup area, access the web page for the phone as described in Access Web Page for
Phone, on page 248, and then click the Network Setup hyperlink.
Table 52: Network Setup area items
DescriptionItem
IP address of the Dynamic Host Configuration Protocol (DHCP) server from which
the phone obtains the IP address.
DHCP Server
Indicates whether the phone obtains the configuration from a Bootstrap Protocol
(BootP) server.
BOOTP Server
Media Access Control (MAC) address of the phone.MAC Address
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
251
Remote Monitoring
Network Setup
REVIEW DRAFT - CISCO CONFIDENTIAL

Table of Contents

Other manuals for Cisco 8961

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 8961 and is the answer not in the manual?

Cisco 8961 Specifications

General IconGeneral
Resolution640 x 480 pixels
Display5-inch TFT color display
Ethernet10/100/1000 Mbps
PowerIEEE 802.3af Power over Ethernet (PoE) Class 3
ConnectivityTwo-port Gigabit Ethernet switch
Buttons4 softkeys
USB PortYes, supports USB 2.0
Headset JackYes, dedicated headset port
SpeakerphoneFull-duplex speakerphone
Codec SupportG.711, G.722, G.729, iLBC
Security802.1X authentication, TLS, SRTP, HTTPS

Related product manuals