Cisco 8961 - Product-Specific Configuration Parameters

Product-Specific Configuration Parameters
You can set the following parameters in any of the previously listed configuration windows:
•
Back USB Port (for Cisco Unified IP Phones 9951 and 9971)
•
Side USB Port
•
Enable/Disable USB Classes
•
Bluetooth (for Cisco Unified IP Phones 9951 and 9971)
•
Bluetooth Profiles (only for Cisco Unified IP Phones 9951 and 9971)
•
WLAN (for Cisco Unified IP Phone 9971 only)
•
Settings Access
•
Web Access
•
Days Display Not Active
•
Display on Time
•
Display on Duration
•
Display Idle Timeout
•
Enable Power Save Plus
•
Phone On Time
•
Phone Off Time
•
Phone Off Idle Timeout
•
Enable Audio Alert
•
EnergyWise Domain
•
EnergyWise Secret
•
Allow EnergyWise Overrides
•
Load Server
•
RTCP
•
Peer Firmware Sharing
•
Cisco Discovery Protocol (CDP): Switch Port
•
Cisco Discovery Protocol (CDP): PC Port
•
Link Layer Discovery Protocol - Media Endpoint Discover (LLDP-MED): Switch Port
•
Link Layer Discovery Protocol (LLDP): PC Port
•
802.1x Authentication
•
Switch Port Remote Configuration
•
PC Port Remote Configuration
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
166
Features, Templates, Services, and User Setup
Product-Specific Configuration Parameters
REVIEW DRAFT - CISCO CONFIDENTIAL